[2017-11-30] Easily Pass 70-741 Exam By Training Lead2pass New Microsoft VCE Dumps (64-76)
New Updated 70-741 New Questions From Lead2pass Free Downloading.v.2017-11-30.111q
Following questions and answers are all new published by Microsoft Official Exam Center: https://www.lead2pass.com/70-741.html
QUESTION 64
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com.
The forest has three sites located in London, Paris and Berlin.
The London site contains a web server named Web1 that runs Windows Server 2016.
You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.
Solution: You install the DFS Replication role service, and then you start the Network Connections service.
Does this meet the goal?
A. Yes
B. No
Answer: A
QUESTION 65
You have 2000 devices, One hundred of the devices are mobile devices that have physical addresses beginning with 98-5F.
You have a DHCP server named Server1.
You need to ensure that the mobile devices register their host name by using a DNS suffix of mobile.contoso.com
A. From the properties of Scopte1, Modify the Conflict detection attempts setting.
B. From the properties of Scope1, Configure Name Protection.
C. From the Properties of IPV4, configure the bindings.
D. From IPV4, create a new filter.
E. From the properties of Scope1, create an exclusion range.
F. From IPv4, run the DHCP Policy Configuration Wizard.
G. From Control Panel, modify the properties of Ethernet.
H. From Scope1, create a reservation
Answer: F
QUESTION 66
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com
You need to create a Nano Server image named Nano1 that will be used as a virtualization host.
The windows server 2016 source files are located in drive D.
Solution: You run the following cmdlet.
New-NanoServerImage Edition Datacenter DeploymentType Most Compute Media `D:\’ TargetPath c:\Nano1\Nano1.wim ComputerNamae Nano1 DomainName Contoso.com
Does this meet the goal?
A. Yes
B. NO
Answer: B
QUESTION 67
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest has three sites located in London, Paris and Berlin.
The London site contains a web server named Web1 that runs Windows Server 2016.
You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.
Solution: You install the Deployment Server role service, and then you restart the World Wide Web Publishing Service.
Does this meet the goal?
A. Yes
B. No
Answer: A
QUESTION 68
You have multiple servers that run Windows Server 2016 and are configured as VPN servers.
You deploy a server named NPS1 that has Network Policy Server (NPS) installed.
You need to configure NPS1 to accept authentication requests from the VPN servers.
What should you configure on NPS1?
A. From RADIUS Clients and Servers, add a remote RADIUS server group.
B. From Policies, add a connection request policy.
C. From Policies, add a network policy.
D. From RADIUS Clients and Servers, add RADIUS clients.
Answer: D
QUESTION 69
Your network contains an Active Directory domain named contoso.com.
The domain contains a Hyper-V host named Server1 that runs Windows Server 2016.
Server1 hosts four machines that are members of the domains.
The virtual machines are configured as sown in the following table.
Which virtual machines can you manage by using PowerShell Direct?
A. Only VM2
B. VM1, VM2, and VM4
C. only VM4
D. VM1, VM2, and VM3
Answer: D
QUESTION 70
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2016.
Server1 is configured as a VPN server.
Server1 is configured to allow domain users to establish VPN connections from 06:00 to
18:00 everyday of the week.
You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Routing and Remote Access, you configure the Properties of Server1.
Does this meet the goal?
A. Yes
B. No
Answer: B
QUESTION 71
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com.
You need to create a Nano Server image named Nano1 that will be used as a virtualization host.
The windows server 2016 source files are located in drive D.
Solution: You run the following cmdlet.
New-NanoServerImage Edition Datacenter DeploymentType Host Package Microsoft- NanoServer-Compute-Package MediaPath `D:\’ TargetPath C:\Nano1\Nano1.wim ComputerName Nano1 DomainName Contoso.com
Does this meet the goal?
A. Yes
B. NO
Answer: A
QUESTION 72
You need to implement network virtualization.
On which object should you configure the virtual subnet ID?
A. Virtual switch
B. Hyper-V server
C. VM
D. Virtual network adapter
Answer: A
QUESTION 73
You plan to deploy several Hyper-V hosts that run Windows Server 2016.
The deployment will use Software defined Networking (SDN) and VXLAN.
Which server role should you install on the network to support the planned deployment?
A. Network Controller
B. Network Policy and Access Services
C. Remote Access
D. Host Guardian Service
Answer: D
QUESTION 74
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server1 that hosts a virtual machine named VM1.
Server1 and VM1 run Windows Server 2016.
The settings for VM1 are configured as shown in the exhibit below.
You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1.
Solution: You start the Hyper-V Guest Service Interface service on VM1.
Does this meet the goal?
A. YES
B. NO
Answer: A
QUESTION 75
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server1 that hosts a virtual machine named VM1.
Server1 and VM1 run Windows Server 2016.
The settings for VM1 are configured as shown in the exhibit below.
You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1.
Solution: You need to enable the Data Exchange integration service for VM1.
Does this meet the goal?
A. YES
B. NO
Answer: A
QUESTION 76
You have a Scale-Out File Server that has a share named Share1.
Share1 contains a virtual disk file named Disk1.vhd.
You plan to create a guest failover cluster.
You need to ensure that you can use the virtual disk as a shared virtual disk for the gust failover cluster.
Which cmdlet should you use?
A. Optimize VHD
B. Optimize VHDSet
C. Convert-VHD
D. Set-VHD
Answer: A
More free Lead2pass 70-741 exam new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDb05IRmRaei1JLVE
At Lead2pass, we are positive that our Microsoft 70-741 dumps with questions and answers PDF provide most in-depth solutions for individuals that are preparing for the Microsoft 70-741 exam. Our updated 70-741 braindumps will allow you the opportunity to know exactly what to expect on the exam day and ensure that you can pass the exam beyond any doubt.
2017 Microsoft 70-741 (All 111 Q&As) exam dumps (PDF&VCE) from Lead2pass:
https://www.lead2pass.com/70-741.html [100% Exam Pass Guaranteed]