[Lead2pass New] Lead2pass Microsoft 70-413 VCE And PDF Instant Download (1-10)
Lead2pass is one of the leading exam preparation material providers. Its updated 70-413 braindumps in PDF can ensure most candidates pass the exam without too much effort. If you are struggling for the 70-413 exam, it will be a wise choice that get help from Lead2pass.
Following questions and answers are all new published by Microsoft Official Exam Center: https://www.lead2pass.com/70-413.html
QUESTION 1
Your company has a remote office that contains 1,600 client computers on a single subnet.
You need to select a subnet mask for the network that will support all of the client computers.
The solution must minimize the number of unused addresses.
Which subnet mask should you select?
A. 255.255.248.0
B. 255.255.252.0
C. 255.255.254.0
D. 255.255.240.0
Answer: A
Case Study 1 – Proseware, Inc (Question 2 – Question 10)
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24 network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts in the New York office reside in the proseware.com domain. All of the user accounts and the computer accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from Windows Server 2008 R2 to Windows Server 2012 R2.
The functional level of the domain and the forest is Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is 172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
– Deploy a read-only domain controller (RODC) to the London office.
– Give users remote access to both offices by using a VPN connection from their laptop or tablet.
– If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30 minutes.
– In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer (ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual machine storage.
– Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
– For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
– The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure of their respective office. The London office will not have a local IT staff. Each office will have approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
– Users in the Montreal office must only be allowed to access shares that are located on File01 and File02. The Montreal users must be prevented from accessing any other servers in the proseware.com forest regardless of the permissions on the resources,
– Users in the New York office must be able to reconnect to the remote access VPN servers automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
– Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be deployed to the proseware.com domain. Administrators in the New York office must be able to restore objects from the Active Directory Recycle Bin.
– The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in cache.
– Each DNS server must be managed by an administrator from the same office as the DNS server.
– The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
– The remote access servers must be able to restrict outgoing traffic based on IP addresses.
– All certificates must be deployed to all of the client computers by using auto- enrollment.
– All of the DHCP Server server roles must be installed on a domain controller.
– Only one DHCP server in each site must lease IP addresses at any given time.
– DHCP traffic must not cross site boundaries.
– RODCs must not contain personal user information.
QUESTION 2
You need to recommend a trust model.
What should you include in the recommendation?
A. A one-way, forest trust that has selective authentication.
B. A one-way, external trust
C. A two-way, external trust
D. A one-way, forest trust that has domain-wide authentication.
Answer: A
Explanation:
From case study:
Users in the Montreal office must only be allowed to access shares that are located on File01 and File02. The Montreal users must be prevented from accessing any other servers in the proseware.com forest regardless of the permissions on the resources.
QUESTION 3
Hotspot Question
You need to recommend a configuration for the DHCP infrastructure.
What should you recommend? To answer, select the appropriate options in the answer area.
Answer:
QUESTION 4
Drag and Drop Question
You need to recommend the VPN protocols for Proseware.
What should you recommend? To answer, drag the appropriate VPN protocols to the correct offices. Each protocol may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content,
Answer:
QUESTION 5
Hotspot Question
You need to recommend a storage configuration for the Hyper-V hosts.
What should you recommend? To answer, select the appropriate options in the answer area.
Answer:
QUESTION 6
You need to recommend a deployment method for Proseware.
What is the best approach to achieve the goal? More than one answer choice may achieve the goal. Select the BEST answer.
A. a WDS Deployment server and Multicast transmissions
B. a WDS Deployment server and Unicast transmissions
C. a WDS Transport server and Multicast transmissions
D. a WDS Transport server and Unicast transmissions
Answer: A
Explanation:
A WDS deployment server is appropriate in this scenario with three offices that will have 50 new clients each. As the WAN links are fast the computers can be deployed through multicast.
Incorrect:
Not B: As the offices are connected through high-bandwidth, low-latency WAN links unicast is not necessary.
Not C, Not D: As each office only will have 50 client computers, a small network, a deployment through a WDS transport server is not required.
https://technet.microsoft.com/en-us/library/hh831764.aspx
QUESTION 7
You need to recommend a solution for the remote access servers.
What should you include in the recommendation?
A. Network address translation (NAT)
B. Logging levels
C. Packet filtering
D. Packet tracing
Answer: C
Explanation:
Scenario: The remote access servers must be able to restrict outgoing traffic based on IP addresses.
Packet filtering can be used to restrict outgoing traffic with the help of an output filter.
Note: Packet filtering consists of creating a series of definitions called filters, which define for the router what types of traffic are allowed or disallowed on each interface. Filters can be set for incoming and outgoing traffic.
* Input filters define what inbound traffic on that interface the router is allowed to route or process.
* Output filters define what traffic the router is allowed to send from that interface.
Incorrect:
Not A: NAT is not able to restrict outgoing traffic. NAT supports static filters can be added to the private interface to protect against threats from internal clients.
https://technet.microsoft.com/en-us/library/Cc754895(v=WS.10)
QUESTION 8
Drag and Drop Question
You need to recommend changes for the Active Directory infrastructure.
What should you recommend? To answer, drag the appropriate domain and forest functional levels for proseware.com to the correct locations. Each functional level may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
QUESTION 9
You run the Get-DNSServercmdlet on DC01 and receive the following output:
You need to recommend changes to DC01.
Which attribute should you recommend modifying?
A. EnablePollutionProtection
B. isReadOnly
C. Locking Percent
D. ZoneType
Answer: C
Explanation:
* Scenario: The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in cache.
* Cache locking is configured as a percent value. For example, if the cache locking value is set to 50, then the DNS server will not overwrite a cached entry for half of the duration of the TTL. By default, the cache locking percent value is 100. This means that cached entries will not be overwritten for the entire duration of the TTL. The cache locking value is stored in the CacheLockingPercent registry key. If the registry key is not present, then the DNS server will use the default cache locking value of 100.
https://technet.microsoft.com/en-us/library/ee649148%28v=ws.10%29.aspx
QUESTION 10
You need to recommend a solution for the RODC
Which attribute should you include in the recommendation?
A. systemFlags
B. searchFlags
C. policy-Replication-Flags
D. flags
Answer: B
Explanation:
You can modify the searchFlags value for a read-only domain controller (RODC) to indicate confidential data on order to exclude specific data from replicating to RODCs in the forest. This meets the requirement as it is stated that RODCs must not contain personal user information.
https://technet.microsoft.com/en-us/library/cc754794(v=ws.10).aspx
More free Lead2pass 70-413 exam new questions on Google Drive: https://drive.google.com/open?id=1b83z5KIZUL3VTF7QfvaVypTlHDaUnZIE
There is no doubt that Lead2pass is the top IT certificate exam material provider. All the braindumps are the latest and tested by senior Microsoft lecturers and experts. Get the 70-413 exam braindumps in Lead2pass, and there would be no suspense to pass the exam.
2017 Microsoft 70-413 (All 235 Q&As) exam dumps (PDF&VCE) from Lead2pass:
https://www.lead2pass.com/70-413.html [100% Exam Pass Guaranteed]