Pass Ensure 70-410 Exam By Training Lead2pass updated Microsoft 70-410 VCE And PDF Dumps (231-240)
Lead2pass 70-410 exam questions which contain almost 100% correct answers are tested and approved by senior Microsoft lecturers and experts. They have been devoting themselves to providing candidates with the best study materials to make sure what they get are valuable. 70-410 practice tests are written to the highest standards of technical accuracy which can make you succeed in the exam.
QUESTION 231
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Server1 runs Windows Server 2012 R2. Server2 runs Windows Server 2008 R2 Service Pack 1 (SP1) and has the DHCP Server server role installed. You need to manage DHCP on Server2 by using the DHCP console on Server1.
What should you do first?
A. From Server Manager on Server2, enable Windows Remote Management.
B. From a command prompt on Server2, run winrm.exe.
C. From Server Manager on Server1, install a feature.
D. From the Microsoft Management Console on Server1, add a snap-in.
Answer: A
QUESTION 232
Your network contains a production Active Directory forest named contoso.com and a test Active Directory forest named contoso.test. A trust relationship does not exist between the forests. In the contoso.test domain, you create a backup of a Group Policy object (GPO) named GPO1.
You transfer the backup of GPO1 to a domain controller in the contoso.com domain.
You need to create a GPO in contoso.com based on the settings of GPO1.
You must achieve this goal by using the minimum amount of administrative effort.
What should you do?
A. From Group Policy Management, right-click the Group Policy Objects container, and then click Manage Backups.
B. From Group Policy Management, right-click the Starter GPOscontainer, and then click Manage Backups.
C. From Group Policy Management, create a new starter GPO. Right-click the new starter GPO, and then click Restore from Backup.
D. From Group Policy Management, create a new GPO. Right-click the new GPO, and then click Import Settings.
E. From Windows PowerShell, run the Copy-GPOcmdlet and the Restore-GPOcmdlet.
F. From Windows PowerShell, run the New-GPOcmdlet and the Import-GPOcmdlet.
G. From Windows PowerShell, run the New-GPOcmdlet and the Restore-GPOcmdlet.
H. From Windows PowerShell, run the Get-GPOcmdlet and the Copy-GPOcmdlet.
Answer: DF
QUESTION 233
You work as an administrator at L2P.com. The L2P.com network consists of a single domain named L2P.com. All servers on the L2P.com network have Windows Server 2012 R2 installed.
You have received instructions to convert a basic disk to a GPT disk.
Which of the following is TRUE with regards to GPT disks? (Choose all that apply.)
A. To convert a basic disk to a GPT disk, the disk must not contain any partitions or volumes.
B. You can convert a basic disk to a GPT disk, regardless of partitions or volumes.
C. GPT is required for disks larger than 2 TB.
D. GPT is required for disks smaller than 2 TB.
E. The GPT partition style can be used on removable media.
F. GPT disks make use of the standard BIOS partition table.
Answer: AC
QUESTION 234
Server1 runs Windows Server 2012 R2 and is installed as an FTP server. Client use App1 to connect to Server1 for FTP. App1 use TCP port 21 for control and a dynamic port for data.
You have allowed port 21 in firewall.
What youshould next do to allow clients to use App1 to connect to server1 using ftp.
A. At Server1 allow firewall rule of outbound
B. At Server1 allow firewall rule of inbound
C. Netsh advfirewalldomainprofile state off
D. Netsh advfirewall set global StatefulFtp enable
Answer: D
QUESTION 235
You have a server named Server1 that runs Windows Server 2012 R2.
You plan to enable Hyper-V Network Visualization on Server1.
You need to install the Windows Network Virtualization Filter Driver on Server1.
Which Windows PowerShell cmdlet should you run?
A. Set-NetVirtualizationGlobal
B. Set-NetAdapterVmq
C. Add-WindowsFeature
D. Enable-NetAdapterBinding
Answer: D
QUESTION 236
A company has a forest with 4 sites. Subnets are as follows:
– MainOffice 172.16.1.0 Subnet: 255.255.255.0 Gateway 172.16.1.254
– Site1 192.168.12.0 Subnet: 255.255.255.0
– Site 2 192.168.13.0 Subnet: 255.255.255.0
– Site 3 192.168.14.0 Subnet: 255.255.255.0
– Site 4 192.168.15.0 Subnet: 255.255.255.0
You add a new server to the MainOffice and it needs to be able to communicate to all sites.
Which route command would you run?
A. route add -p 192.168.8.0 netmask 255.255.252.0 172.16.1.254
B. route add -p 192.168.0.0 netmask 255.255.248.0 172.16.1.254
C. route add -p 192.168.12.0 netmask 255.255.252.0 172.16.1.254
D. route add -p 192.168.12.0 netmask 255.255.240.0 172.16.1.254
Answer: C
QUESTION 237
Server 1 and Server2 host a load-balanced Application pool named AppPool1.
You need to ensure thatAppPool1 uses a group Managed Service Account as its identity.
Which 3 actions should you perform?
A. Install a domain controller that runs Windows Server 2012 R2, Run the New- ADServiceAccountcmdlet, Modify the settings of AppPool1.
B. Configure the Security settings of the contoso.com zone.
C. Add a second legacy network adapter, and then run the Set-VMNetworkAdoptercmdlet.
D. From Windows Powershell, run Get-DNSServerDiagnostics.
Answer: A
QUESTION 238
Hotspot Question
You run a Windows Server 2012 R2and implementing 3 new printers in a warehouse.
You need to makean exclusion forthese IP addresses within DHCP server.
Select the location where would configure at the DHCP console?
Answer:
QUESTION 239
Hotspot Question
You have a Server Core 2012 installation and all roles and features removed.
The server does not haveaccess to Windows Update.
You mount the network volume containing the installation files for Server 2012.
You need to install DNS and DHCP server role.
Which directory do you reference for installing?
Answer:
QUESTION 240
Server1 runs Windows Server 2012 R2 and is installed as an FTP server. Client use App1 to connect to Server1 for FTP. App1 use TCP port 21 for control and a dynamic port for data.
You have allowed port 21 in firewall.
What youshould next do to allow clients to use App1 to connect to server1 using ftp.
A. At Server1 allow firewall rule of outbound
B. At Server1 allow firewall rule of inbound
C. netshadvfirewalldomainprofile state off
D. netshadvfirewall set global StatefulFtp enable
Answer: D
Lead2Pass 70-410 brain dumps can ensure you a passing score in the test,and once there is some changes on 70-410 exam, Lead2pass will update the study materials timely to make them be consistent with the current exam.